Mini workshop diesel oil heater model D400

The mini diesel workshop heater model D400 is suitable for heating various locations and also offers good savings in energy and fuel consumption. This heater has a 90% efficiency in heat production. It heats large spaces in a short amount of time, is easily portable, and simple to install.

Mini diesel workshop heater model D400

Dadman Tahmin Iranian is one of the most reputable Iranian brands in the field of cooling and heating products. This company uses the latest available technologies and the newest systems and technologies to produce and market the most efficient products. The mini diesel workshop heater model D400 is a type of heater with natural convection heat transfer, designed for industrial use, and is a very suitable and cost-effective option for workshop, industrial spaces, and also unfinished buildings. In this heater, air is blown into the combustion chamber by a blower, where it mixes with the incoming fuel (diesel and kerosene) to form combustion. The required fuel for this heater is supplied from the heater’s tank after the solenoid valve is activated.

The installation location for the mini diesel workshop heater model D400 must have proper air ventilation. The area around it should also be clear for a radius of 1.5 meters, and the surface beneath it should not be flammable. This model, with its multiple mechanisms, has also been able to significantly save on fuel consumption. If the device is installed in an environment outside the hall, there will be no heat loss. This heater has numerous features, the most important of which we will mention below.

Physical Specifications

The mini diesel workshop heater model D400 has a high heating capacity of 42,000 kilocalories per hour. It’s important to remember that this number is based on the maximum heat output with continuous operation for one hour. The actual fuel consumption under normal conditions will be about 30% less than this figure.

It has an automatic fuel shut-off safety switch in case of a power outage, which prevents fire.

It has a stainless steel furnace resistant to rust and high heat.

It has cast iron and heat-resistant plates to create a proper flame.

The product does not deform over time.

It has heat transfer fins to increase efficiency.

It has a durable cast iron atmospheric burner.

Its weight is 70 kg and its power consumption is 220 volts.

It has a heat-resistant silver-colored fireproof coating.

The fuel consumption of the mini diesel workshop heater model D400 is up to 1.8 liters per hour.

Its tank capacity is 28 liters.

The device dimensions are 140x75x60 cm.

Features of the mini diesel workshop heater model D400

• It has a beautiful and stylish appearance.
• It has suitable efficiency and performance.
• It has various standards and very good safety.
• It is also much more cost-effective than other available systems.
• It has the ability to provide spot heating and cover large spaces, and it occupies less space compared to other heaters.
• The space it can cover is 600 cubic meters.
• Due to its cylindrical design, the mini diesel workshop heater model D400 distributes heat 360 degrees in the environment. This feature increases its efficiency in industrial spaces. The area around the heater just needs to be kept a bit clear to prevent energy waste and allow it to heat the environment faster.
• The presence of a heat blower behind the heat exchanger also helps to evenly distribute heat throughout the required space.
• It has a 24-month valid physical health and authenticity guarantee. The guarantee is provided to create a good feeling of optimal and smart shopping for you, dear ones.

Key Points About This Product

To use the Mini Kerosene/Diesel Workshop Heater Model D400, you must observe all safety measures. Please note that in places without proper ventilation, you must install a flue, because toxic gases from fuel combustion can cause poisoning. The flue must maintain a sufficient safety distance from flammable materials along its path, especially when passing through a ceiling or wall, and must have appropriate thermal insulation.

Additionally, this model has a simple installation and repair process, which results in much lower costs for the consumer. This also makes the heater more convenient and practical than other heating systems available on the market.

The Mini Kerosene/Diesel Workshop Heater Model D400 heats a space through natural convection, which means it needs more time to warm the desired area compared to models with a fan.

• The minimum required empty space around the heater when installed must be 1.5 meters. The area around the product should be completely clear and not be in the path of flammable materials.
• With a weight of 70 kg, this model can be easily used in urban and rural environments, as well as for travel.
• To make a confident choice when purchasing, be sure to consult with experts from Dadman Tahvieh, as they can provide more information on influential environmental factors such as the required square footage, ceiling height, and geographical location.

Applications of the Workshop Kerosene-Diesel Heater Model D400

Due to its high heating capacity, this heater is used for providing warmth in industrial and workshop environments. These heaters are typically used for warming large spaces such as warehouses, livestock farms, poultry farms, factories, mosques, greenhouses, sports halls, and industrial workshops. This type of heater is also used in places like mechanical workshops, body shops, construction projects for drying ceilings and walls, and manufacturing units.