Dadman Cooling Products
One of the most widely used pieces of equipment in hot and dry regions is the evaporative cooler and home cooler. These devices can convert warm air into more pleasant and cool air by evaporating water. Among these, the easy installation, availability, acceptable energy consumption, and low cost of the 3500 evaporative cooler have made it a bestseller among other models.
The 3500 evaporative cooler is a bestseller that effectively creates the necessary humidity for medium-sized environments. Because its impeller is a single, balanced piece produced by a fully automatic machine, it generates very little noise and vibration, which in turn increases its lifespan. The pads of the 3500 evaporative cooler have a uniform thickness across all surfaces, which both facilitates water evaporation and prevents warm air from flowing into the cooler.
This product’s relatively light weight and convenient size make it easy to move, install, and service. Its galvanized body gives it good resistance to rust. Additionally, the 3500 evaporative cooler provides a good water supply to the motor, which effectively prevents it from overheating.
In general, to choose a good home cooler, you should determine what level of efficiency you expect from it. Here, we will specifically address the general features you should consider when buying a 3500 evaporative cooler:
An evaporative cooler has various components to perform its function, each of which is introduced below.
The 3500 evaporative cooler is categorized as a fixed evaporative cooler. These models can be installed as either top-discharge or front-discharge units on rooftops or in other outdoor building spaces like balconies or yards. The 3500 evaporative cooler has larger dimensions than portable and movable coolers. With a suitable weight of about 45 kg, it’s still movable, but it requires ducting and must be connected to a permanent water supply. This model can typically work with both aspen pads and cellulose pads.
This product has various features that we’ll highlight below.
Regular servicing of an evaporative cooler not only reduces its energy consumption in the long run but also improves its efficiency, performance, and lifespan. Sometimes, certain parts may become worn out due to lack of use, which should be carefully inspected or replaced.
Servicing the cooler’s motor is very important, since all of the unit’s cooling performance depends on the motor.
The pads should be replaced every year. If not replaced, they can become a breeding ground for bacteria and pose health risks.
The water distribution system of the Evaporative Cooler 3500 must also be checked regularly. All pads should be fully soaked, with no dry areas left, as this would reduce the unit’s efficiency and cooling performance.
The base (water pan) of the Evaporative Cooler 3500 should be cleaned of sediment, which will significantly increase the amount of cool air produced.
Washing the cooler is also very important. This should be done with plastic brushes to avoid damaging the paint and to prevent rusting over time.
It is essential to ensure that the electrical supply to the Evaporative Cooler 3500 is working properly. Any interruptions in the power supply can increase the risk of motor damage.
If the cooler is exposed to direct sunlight, after servicing it a shade cover should be installed to keep it protected.
Sometimes, despite numerous safety and repair recommendations, users don’t pay attention to these issues. Therefore, when a cooler stops working, there’s a chance it might be burned out.
The following are signs that a cooler might be burned out:
All of these signs also apply to the 5500, 7000, and 7500 evaporative coolers. You should prevent these incidents by providing proper and continuous maintenance.
