Cellulose cooler 7000 Energy grade A

The Cellulose Cooler 7000 is a type of evaporative cooling system. This device was the first in the country to be produced with cellulose pads and has a European standard certificate. The cellulose pads used in this product maintain consistent cooling efficiency, which is a significant advantage over conventional evaporative coolers. This product is deemed suitable for spaces larger than 120 square meters. Cellulose coolers generally operate on single-phase 220-240V electricity. Their internal fan is made of metal, and the body of the Cellulose Evaporative Cooler 7000 is typically made from galvanized sheet metal. Its water tank is connected to the city water supply and fills automatically.

The Cellulose Evaporative Cooler 7000 is equipped with a remote control and has intelligent and automatic temperature control via an ambient thermostat. The motor power of this unit is 3/4 horsepower, which provides good efficiency for cooling large spaces. The maximum airflow capacity is approximately 7990 cubic meters per hour or 7000 CFM. The dimensions of this model are 90 x 90 x 111 cm, with a weight of 86 kg. The air outlet measures 52 x 54 cm, and the cellulose pads used in these coolers are usually 7.5 cm thick. These coolers are equipped with an RCCB life protection safety system.

Advantages of the Cellulose Evaporative Cooler 7000

The Cellulose Cooler 7000 offers significant benefits. This product is considered a low-consumption evaporative cooler. The cellulose pads greatly help increase the cooling efficiency of the environment. In dry regions, these pads can cool up to 60% more air. Additionally, the self-standing nature of the cellulose pad, compared to aspen pads, helps maintain consistent cooling efficiency. These units are equipped with an ambient thermostat that intelligently controls the temperature. The operating time can be adjusted using an electronic timer. The presence of the RCCB life protection system and a two-pole cutoff switch increases the device’s safety.

Some models of the Cellulose Cooler 7000 have a polymer body. This body offers high resistance to moisture and heat, which makes it less prone to corrosion. More advanced models with BLDC motors and polymer fans produce less vibration and very little noise. These models can reduce energy consumption by up to 70% and have a higher cooling efficiency (Energy Grade A). In these models, the need for a belt and bearings is eliminated, which reduces maintenance and repair costs. The motor speed is also adjustable. Some models have an automatic water drain pump and a water level float. The Cellulose Evaporative Cooler 7000 can provide greater airflow for long duct runs.

You might also like:

• Evaporative Cooler 3500
• Evaporative Cooler 5500

Applications and Dimensions of the Cellulose Cooler 7000

The Cellulose Evaporative Cooler 7000 and higher-capacity models are primarily suitable for large spaces. These include large buildings, office halls, and wedding venues. Commercial and industrial spaces, schools, banks, and restaurants are also among the applications for these coolers. Due to its large size, this product is less commonly installed in regular residential buildings, though it is suitable for homes with a large floor area.

The dimensions of the Cellulose Evaporative Cooler 7000 can vary depending on the manufacturer, as there is no specific standard size. For example, some models have approximate dimensions of 87 x 87 x 115 cm. The industrial models of these coolers have much larger dimensions. The motor in these coolers is usually two-speed, and its power increases with the cooler’s size. In industrial models, the motors may require three-phase electricity. Some of these coolers can be configured with top, side, or down discharge.

Technology and Structure

The body of the standard Cellulose Cooler 7000 models is made of galvanized sheet metal with a zinc coating. In coolers with capacities above 7000, polymer sheets are also used. The polymer body offers greater resistance to moisture and heat, which makes it less susceptible to corrosion. The cellulose pads are one of the main and most important features of these products, as they significantly increase cooling efficiency.

The manufacturing technology of the polymer Cellulose Cooler 7000 is more advanced. These coolers operate without the need for bearings and belts. They rely on their powerful motor to produce cold air, which greatly helps reduce energy consumption. Some models feature high-efficiency BLDC motors. These motors are low-consumption and allow for variable speed control. An inverter system is also used in some of these coolers.

Purchase Tips and Price of the Cellulose Evaporative Cooler 7000

When buying the Cellulose Evaporative Cooler 7000, be sure to check that the product has the Iranian National Standard mark. All products offered in reputable stores have this mark. This product and its higher-capacity models are among the most expensive types of home coolers available on the market. This high price is due to their larger dimensions, greater cooling power, and the presence of cellulose pads.

We recommend buying the Cellulose Evaporative Cooler 7000 online from Dadman Tahvieh’s online store. Dadman Tahvieh inspects products for quality and standards before selling them and offers technical support and consultation. Before finalizing your purchase, pay attention to the technical specifications, dimensions, and the electrical and installation space requirements of the product.