A low-consumption evaporative cooler performs better and saves energy. This device is very popular due to our country’s climate, and people often choose this type of cooler first to cool their environment. These coolers use a cellulose pad instead of traditional pads, which is why they are also classified as a cellulose evaporative cooler. Read on to learn more about this type of cooler.
Given the global water crisis and our country’s dry, desert climate, it’s essential for everyone to know how to reduce the water consumption of a home cooler to also avoid extra costs. With a low-consumption evaporative cooler, you can reduce water usage and improve your cooler’s performance.
A low-consumption evaporative cooler has a beautiful design, a high-quality motor, and a timer. You’ll feel a strong cooling effect from this device, as it effectively cools the environment in the summer. In addition to providing excellent cooling, these coolers have very low electricity consumption. In recent years, low-consumption evaporative coolers have gained more features, and their price is reasonable for the extra equipment they include.
Some models of low-consumption evaporative coolers have temperature control, a sleep timer, a touch keypad, a life-protection switch, and a remote control. The sleep timer lets you set the device to run for a period of 1 to 9 hours, allowing you to rest peacefully. With the remote control, you can remotely control the motor speed, water pump, temperature, and turn the cooler on or off.
Given Iran’s hot and dry climate, using a low-consumption evaporative cooler constantly can increase household electricity costs. To address this issue and optimize energy consumption, you can take a few steps. Here’s a look at them:
- Choose the Right Cooler: When buying a cooler, consider your geographic location. If you don’t buy the right cooler for your climate, the space won’t cool properly, and the cooler will have to run constantly, leading to higher electricity and energy consumption.
- Match Capacity to Space: Make sure the cooler’s capacity is proportional to the size of the indoor space. If the capacity is too small for the area, the cooler won’t work effectively, leading to low efficiency and significantly higher energy use.
- Reduce Duct Length: The length of your ducts has a big impact on cooling. The longer the distance between the low-consumption evaporative cooler and the indoor space, the more the air may warm up or leak from the ducts. If possible, try to shorten this distance.
- Install a Sunshade: Placing a sunshade over the cooler prevents direct sunlight from hitting the body and is very effective in reducing electricity consumption.
- Manage Heat and Usage: Try not to use multiple heat-generating appliances at the same time. Also, schedule your use of the low-consumption evaporative cooler. The device needs to rest after a period of operation to perform better. And don’t forget to properly insulate your space.
Where to Install a Low-Consumption Evaporative Cooler
Choosing the right place to install a low-consumption evaporative cooler is very important. If it’s not in the correct location, it won’t perform properly or cool the space effectively. Here are the key factors to consider:
- Avoid Direct Sunlight: Sunlight hitting the cooler’s body heats up the water, causing it to produce warm air instead of cool air. To avoid this, try to install the cooler on the north side of the building.
- Prioritize Airflow and Shade: The cooler should be installed in a place with open space around it so that a sunshade can be easily installed and there is proper air circulation from at least three sides.
- Minimize Distance: The cooler should be located as close as possible to the indoor space. The further away it is, the more the air can heat up or leak from the ducts before it reaches the room.
- The Best Location: A balcony is often the best place to install a low-consumption evaporative cooler. It usually requires less extensive ductwork and is naturally less exposed to direct sunlight.
When buying a low-consumption evaporative cooler, pay attention to the following points:
- Energy Efficiency: Check the energy consumption label and choose a model with a better grade. For example, a cooler with an “A” energy grade consumes about 60% less energy than one with a “G” grade.
- Basic Features: Ensure the cooler has features like an automatic drain pump, an air filter, and motor speed control.
- Proper Sizing: Select a cooler with a capacity that matches the size of your space.
- High-Quality Build: Pay attention to the quality of the cooler’s body and its high evaporation efficiency. The higher the efficiency, the better the cooling.
- Safety and Convenience: Make sure the device has a life-protection switch, washable filters, and can operate without vibration or noise.
- Design and Ergonomics: The cooler should have both top and side air discharge options. The body should have a grille-like design for better cooling efficiency. The stand should be ergonomic, height-adjustable, and levelable.
- Advanced Technology: Look for features like a soft starter for smooth motor operation, the ability to manually and automatically control temperature and motor speed, and a programmable timer for setting on/off times.
- Reputation and Service: Purchase your low-consumption evaporative cooler from a reputable brand that provides good after-sales service.